ACDi’s North Carolina Manufacturing Plant Installs New Koh Young 3D SPI and AOI Equipment

March 9, 2020

ACDi, a leading electronics manufacturing services provider, announces the most recent capital investment in printed circuit board inspection technology and equipment at their Nashville, North Carolina factory. Final equipment installation and training was recently completed incorporating 3D imaging technology at its Nashville facility with the addition of Koh Young KY8030-3 3D Solder Paste Inspection and […]

More »

ACDi’s Billy Deavers Earns IPC/WHMA-A-620 Certified IPC Trainer Certification

February 11, 2020

ACDi, a leading electronics manufacturing services provider, announces Cable Engineer, Billy Deavers has successfully passed the IPC/WHMA-A-620 Requirements and Acceptance for Cable and Wire Harness Assemblies Certified IPC Trainer course. The IPC/WHMA-A-620 standard specifies best practices and requirements for the manufacture of cable, wire and harness assemblies. The standard defines materials, methods, tests and acceptability […]

More »

ACDi Achieves ANSI/ESD S20.20-2014 Certification and AS9100D Recertification

January 7, 2020

FREDERICK, MD. (PRWEB) JANUARY 07, 2020 ACDi, a leading electronics manufacturing services provider, announces they have been audited by BSI Group and approved for ANSI/ESD S20.20-2014 certification at their Frederick, MD headquarters. ANSI/ESD S20.20 is a standard developed by the Electrostatic Discharge Association (ESDA). This certification is for companies that design, manufacture, package, test and/or handle […]

More »

ACDi Adds Equipment and Personnel in Response to Increased Demand for Electronics Manufacturing Services

August 28, 2019

ACDi broadens manufacturing capabilities with investment in new equipment for its Frederick, MD headquarters with the addition of two Mycronic MY300DX pick and place machines. The purchase was made due to increasing demand for electronics manufacturing services and to complement other new equipment purchases previously announced. “After evaluating several manufacturers’ pick and place machines, we […]

More »

ACDi Adds 3 Key Pieces of Equipment to Electronics Manufacturing Factory

October 23, 2018

SMD X-Ray Counting Machine, 3D Solder Paste Inspection Machine and 3D Automated Optical Inspection Machine Added to Frederick, MD Headquarters ACDi, a leading electronics contract manufacturing firm, announced the addition of three new pieces of equipment to their Frederick, MD headquarters. The company has purchased, installed and is fully operating Optical Control’s SMD X-Ray Counting […]

More »

ACDi Celebrates PCB Design Milestone with $10,000 Frederick County Public Schools Donation

September 14, 2018

Frederick County Public Schools Superintendent Dr. Terry Alban met with American Computer Development, Inc. (ACDi) President and CEO William Hornbaker today to accept a generous $10,000 donation from the electronics manufacturing services firm. ACDi presented the donation to mark a major milestone in the firm’s history—its 10,000th design order. The donation is targeted to support […]

More »

ACDi to Exhibit at PCB Carolina

October 27, 2017
ACDi exhibitor at PCB Carolina 2017

ACDi will be exhibiting at PCB Carolina, the east coast’s premier electronics design show, on November 8, 2017 at the McKimmon Center in Raleigh, NC. In addition to the keynote address by Susan Sanford, executive director for the Research Triangle Cleantech Cluster (RTCC), there will be 16 technical sessions, an exhibition hall and soldering workshops. […]

More »

ACDi Announces Hiring of New Printed Circuit Board Design Engineer, Chuck Bird

September 25, 2017

As a manufacturing firm, ACDi’s biggest differentiator is their people. With the growth of the electronics and IoT industries, ACDi is proud to announce the hiring of an additional printed circuit board designer, Charles (Chuck) Bird. ACDi prides themselves on hiring industry experts who can offer solutions to your challenging design and product development issues. […]

More »

ACDi to Exhibit at PCB Carolina 2017

September 15, 2017

ACDi will be exhibiting at the PCB Carolina show to be held November 8, 2017 at the McKimmon Center  in Raleigh, NC. Stop by our table and say hello if you are attending. http://www.pcbcarolina.com/

More »

ACDi, a Washington, DC area Electronics Manufacturer, Announces the Hiring of A New Printed Circuit Board Design Engineer

August 16, 2017

As the electronics industry continuously evolves at a fast pace, ACDi recognizes the importance of recruiting new talent with fresh ideas. With that approach, ACDi announces the hiring of Priya Sherke as our newest printed circuit board design engineer. Ms. Sherke has spent the past five years with progressive growth at Sanstar Microsystems in Nagpur, […]

More »